SKU 390794251 Aisle 11 Bay 0BL
Description
BrassCraft Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 24 in. Stainless Steel Gas Connector 1/2 in. O.D. (85,000 BTU)
Product Overview
BrassCraft’s Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. California residents: seeProposition 65 information * 3/8 in. I.D. (1/2 in. O.D.) corrugated stainless steel with corrosion resistant coating * Safety+PLUS excess flow valve protects against gas fires and explosions - 1/2 in. MIP connection to gas supply or gas ball valve * Safety+PLUS valve ideal for most common household gas appliances * Safety+PLUS valve features automatic activation and reset * Safety+PLUS valve is 100% factory performance tested * Safety+PLUS valve installs like a standard gas fitting; can be installed in vertical or horizontal position * ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt * Use with natural and LP (propane) gases * Gas connector is 100% leak tested * Approved for indoor and outdoor use * Temperature rating: 32° F to 150° F * Pressure rating: 1/2 psi maximum * Designed, machined and assembled in the USA * CSA certified
Specifications
Gas Vent Pipe and Fittings Accessory Type |
Gas Appliance Connector |
Assembled Depth (in.) |
1.250 in |
Maximum Working Temperature (F) |
150 |
Connection type |
MIP x MIP |
Assembled Width (in.) |
1.250 in |
Manufacturer Warranty |
Limited Manufacturer Warranty |
Certifications and Listings |
CSA Listed |
Returnable |
90-Day |
Maximum Pressure (psi) |
0.5 |
Inner material |
Stainless steel |
Inner diameter (in.) |
0.375 |
Assembled Height (in.) |
25.16 in |
Outer diameter (in.) |
0.5 |
Product Weight (lb.) |
0.7156 lb |
Product Length (in.) |
24 in |
Outer material |
Stainless steel |
Minimum working temperature (F) |
32 |